Optional) Ibattery - Huawei FusionModule2000 Product Description

FusionModule2000 Smart Modular Data Center
Product Description
Scenario
eLight fault
Table 8-62 eLight system technical specifications
Item
eLight power
eLight actuator
eLight strip light
Protection level
Operating environment

8.3.12 (Optional) iBattery

The iBattery consists of the iBOX and iBAT.
The iBOX is a battery information collection module. It collects battery status data from a
group of downstream iBATs through wireless communication, and sends the data to the
upstream management unit through a COM or PoE port.
The iBAT is a battery monitoring module that supports 12 V power input and monitors the
voltages, internal resistances, and pole temperatures of batteries.
Issue 06 (2020-05-21)
Light Color
The strip light flashes in red if eLight
fails to communicate with the
ECC800-Pro.
Specifications
 Rated input voltage: 220 V AC/230 V AC/240 V AC
 Frequency: 50/60 Hz
Output: ≥ 93 W, 24 V DC


Certification: CE
 Rated input voltage: 24 V DC
 Two output channels. The I output is connected to the
RGBW flexible strip light, and supplies different voltages
depending on host instructions so that the light can be in
different colors. The II output supplies a fixed voltage of 24
V DC.
 Modbus communications protocol, RS485 interface, two
RJ45 ports
 Certification: CE
 Rated input voltage: 24 V DC
 Light type: RGBW LED strip light, in different colors
depending on instructions
 Power: RGB fully on under the maximum working
condition, power P ≤ 12 W/m
 Installation mode: buckled in a sheet metal light slot
 Certifications: CE and CCC
≥ IP20

Operating temperature range: 4–40° C
 Humidity range: 5%–95%, non-condensing
Copyright © Huawei Technologies Co., Ltd.
8 Intelligent Module Management System
Remarks
-
196