Huawei FusionModule2000 Product Description page 203

FusionModule2000 Smart Modular Data Center
Product Description
Figure 8-48 eLight actuator
Table 8-61 Color definitions of the eLight strip light
Scenario
Entrance
Unassociated alarm
severity
Associated alarm
severity
Issue 06 (2020-05-21)
The appearance of the eLight actuator depends on the product delivered onsite.
Light Color


Blue
NOTE
When Associated alarm severity in
ECC800-Pro WebUI is selected to None.


Copyright © Huawei Technologies Co., Ltd.
If access authorization succeeds, the
light is blinking for 3 seconds in
green color, indicating that the door
can be opened.
If access authorization fails, the light
is blinking for 3 seconds in red color,
indicating that the door cannot be
opened.
Mapping between smart module
alarm severities and strip light colors:
− Critical alarm: red
− Major alarm: orange
− Minor alarm: yellow
− Warning alarm: gray
No alarm: strip light off
8 Intelligent Module Management System
Remarks
Associated with the
access control for an
end door.
-
Critical and major
alarms are associated by
default. Alarms of any
severity can be
associated manually.
Alarms are associated
with the eLight on both
ends. If associated
alarms of multiple
severities appear, the
strip light color
indicates only the
highest alarm severity.
195