Mitsubishi Electric MELSEC iQ-R Series Quick Start Manual page 64

2.
Start and confirmation of the main shaft (input axis)
1. Set the axis No. for the main shaft (input axis). Double click X62 while pressing SHIFT.
1.
2. Set the program No. for Axis 2. Double click X66 while pressing SHIFT.
3. Start the main shaft (input axis). Double click M80 while pressing SHIFT.
Output axes move while synchronizing to the movement of the main shaft.
2.
3.
4 SYNCHRONOUS CONTROL STARTUP
62
4.4 Operation Check for Synchronous Control