Mitsubishi Electric MELSEC iQ-R Series Quick Start Manual page 59

3.
Transition of synchronous control parameter window
1. Select [Axis #1 Synchronous Parameter] from the menu.
Axis #1 synchronous parameters can now be set.
2. Click [Synchronous Control Image] to open the image screen.
[Synchronous parameter]
1.
[Input axis parameter]
3. Select the main shaft to open the input axis parameter.
Parameters related to the input axis (Axis 2) can now be set.
4.
Settings for synchronous control parameters and input axis parameters are completed.
2.
3.
4.3 Parameter Creation for Synchronous Control
4 SYNCHRONOUS CONTROL STARTUP
4
57