Replacing A Humidifier Cylinder - Huawei NetCol5000-C Series User Manual

NetCol5000-C030 In-row Chilled Water Smart Cooling
Product
User Manual (Simple Configuration)
Step 5 Install a new electric heater in an inverse order.
Step 6 Verify that cables are correctly connected and power on the device.
Step 7 Choose Maint > Performance Maint on the main menu and then clear the electric heater
running time.
----End

6.4.7 Replacing a Humidifier Cylinder

Prerequisites


Context
Recommended tool: Phillips screwdriver, flat-head screwdriver, socket wrench, cable ties,
diagonal pliers
Preparation: The device can only be maintained from the rear door.
Procedure
Step 1 Open the rear door and remove the air filter.
Step 2 Switch the manual drain button on the side of the electric control box to the ON position to
drain water in the humidifier cylinder.
Step 3 Tap Shutdown on the main screen and power off the device. Then switch the button back to
OFF.
Step 4 Unfasten the screws on the evaporator hose clamp to loosen the evaporator hose, as shown by
(1) in
Issue 09 (2020-01-10)
The humidifier cylinder needs to be replaced.
A spare humidifier cylinder of the same model is available and functional.
Figure 6-10.
Copyright © Huawei Technologies Co., Ltd.
6 System Operation and Maintenance
170