Removing The Pallet - Huawei NetCol5000-C Series User Manual

NetCol5000-C030 In-row Chilled Water Smart Cooling
Product
User Manual (Simple Configuration)

3.6 Removing the Pallet

Procedure
Step 1 Open the rear door and remove the kit connecting the pallet to the cabinet at the rear door.
Figure 3-18 Removing the connecting kit at the rear door of the cabinet
1.
2.
3.
Step 2 Open the front door. Use the same method to remove the kit connecting the pallet to the
cabinet at the front door.
Properly store the bolts. If a support is required, use the bolts to secure the support.
Step 3 Move the cabinet to the specified position. A manual pallet truck is usually used to transport
the equipment. If a pallet truck is unavailable or not allowed, move the equipment by
manpower. Six people are required to complete the handling. After two side panels are
removed, four people carry the equipment by holding the area in the following figure and the
other two hold it to prevent tilting. Reinstall the side panels after the cabinet is moved to the
specified position.
Issue 09 (2020-01-10)
Remove the two M10 bolts securing the connecting kit at the rear door of the cabinet to
the pallet.
Remove the two M12 bolts securing the connecting kit at the rear door of the cabinet to
the cabinet.
Pull out the connecting kit.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
46