Huawei NetCol5000-C Series User Manual page 173

NetCol5000-C030 In-row Chilled Water Smart Cooling
Product
User Manual (Simple Configuration)
Figure 6-6 Removing the electric control box
Step 3 Remove all cables from the side panel of the electric control box, as shown by (3) in
6-6.
Step 4 Remove the four screws that secure the electric control box to the support, as shown by (4) in
Figure
Step 5 Pull the handle on the side panel of the electric control box to remove the box, as shown by (5)
in Figure
box is heavy.
Step 6 Remove the three screws from the cover of the electric control box, as shown by (6) in
6-6.
Step 7 Pull the handle on the cover to remove the cover, as shown by (7) in
Step 8 Replace the faulty component in the electric control box.
Step 9 Install the electric control box in an inverse order.
Issue 09 (2020-01-10)
6-6.
6-6. Place it horizontal on the floor. Exercise caution because the electric control
Copyright © Huawei Technologies Co., Ltd.
6 System Operation and Maintenance
Figure 6-6.
Figure
Figure
164