Setting Parameters For The Scenario Where The Ibox Connects To The Ecc800 - Huawei iBattery 3.0 User Manual

iBattery 3.0
User Manual
Item
trip
Multi-Hall cur. setting
iBOX No.

Figure 5-9 iBOX Settings
Step 2 On the iBOX WebUI homepage, choose System Settings > Battery Curve and set the
battery curve for each battery string.
----End
5.3 Setting Parameters for the Scenario Where the iBOX
Connects to the ECC800
Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose Monitoring > Power Distribution > iBOXn > Running Parameters.
Step 3 Set the following parameters and retain default values for other parameters.
Issue 07 (2019-12-30)
UPS WebUI
a. On the UPS WebUI homepage, choose Param. Settings > Battery Setting, and set
Number of battery strings.
b. On the UPS WebUI homepage, choose iBOX Settings, and set Basic Param.,
Advanced Param., and Batt. String Config.
Copyright © Huawei Technologies Co., Ltd.
Description
Enable.
Multi-Hall cur. setting is equal to the number of Hall effect
sensors at the positive or negative terminal of a battery string
(Multi-Hall cur. setting ≥ 1).
Set this parameter based on the planned codes for iBOXs.
5 System Commissioning
50