Ibat - Huawei iBattery 3.0 User Manual

iBattery 3.0
User Manual
Name
Button pressing
Button pressing
Button holding
down
Default Button
Table 2-12 Default button description
Name
Default button

2.2 iBAT

The iBAT is a battery monitoring module that supports 12 V power input and monitors the
voltages, internal resistances, and pole temperatures of batteries.
Features




Issue 07 (2019-12-30)
Definition
Press the button for less
than 1s.
Press and hold the
button for more than 1s
but less than 5s.
Press and hold the
button for more than 10s
but less than 20s.
Definition
Press and hold the
button for more than 10s
but less than 20s.
Monitors the voltages, internal resistances, and pole temperatures of batteries.
Uploads battery data to iBOX through wireless communication.
Has the hibernation function:
When the battery supply voltage is lower than 9.6 V for more than 30 minutes, the
−
iBAT automatically powers off.
− When the iBAT has failed in communication for more than 30 minutes, it
automatically powers off.
− When the iBAT has not been networked successfully more than two days after
power-on, it automatically powers off (when the battery voltage is higher than 2.18
V/cell for 10 minutes, the iBAT will start again).
− After networking is complete, when the iBAT detects that the battery voltage is
lower than 12.6 V for 50 hours, the iBAT automatically powers off.
Supports the serial port function. For details, contact Huawei technical support.
Copyright © Huawei Technologies Co., Ltd.
Function
iBOX blinking function
Creates a network if no network has
been created. Switches between network
organization and data transmission if a
network has been created.
Clears the current network (including
the network parameters of all the online
iBATs).
Function
Reset to the default IP address
(192.168.0.10).
2 Overview
13