Scenario Where The Ibox Connects To The Ecc800 - Huawei iBattery 3.0 User Manual

iBattery 3.0
User Manual
Figure 3-21 Setting the iBOX DIP switch
Step 3 (Optional) If multiple iBOXs are cascaded, connect the cable between the UPS and iBOXs.
Figure 3-22 Cable connections between the UPS and the iBOXs (cascaded)
----End

3.6.2 Scenario Where the iBOX Connects to the ECC800

Procedure
Step 1 Connect the iBOX signal cables.
The communications cable, with an RJ45 connector, delivered with the BCB box is used to
connect the new BIB board, and the cable without an RJ45 connector is used to connect the
old BIB board.
Issue 07 (2019-12-30)
Prepare an RS485 cable by yourself.
Dashed lines indicate the cascaded iBOX communications cables.
Copyright © Huawei Technologies Co., Ltd.
3 Installing Devices
34