Scenario Where The Ibox Connects To The Neteco - Huawei iBattery 3.0 User Manual

iBattery 3.0
User Manual
Figure 3-24 Connecting the iBOX signal cables (new BIB board)
Table 3-4 Mapping relationship of ports
BIB J1 Signal Port
5 OL
6 STA
7 DRV
8 GND
Step 2 (Optional) If there are multiple iBOXs, connect each iBOX to the smart ETH gateway
separately. The method of connecting cables between the iBOX and southbound components
are the same.
----End

3.6.3 Scenario Where the iBOX Connects to the NetEco

Context
Scenario 1: If the LAN switch provides the POE function, directly connect the iBOX to the
LAN switch through the POE port. An iBOX adapter does not need to be installed.
Scenario 2: If the LAN switch does not provide the POE function, the iBOX obtains power
from the adapter through the POE port and connects to the FE port on the LAN switch
through the DATA port on the adapter.
Issue 07 (2019-12-30) Copyright © Huawei Technologies Co., Ltd.
iBOX BCB Signal Port
OL
STA
DRV
GND
3 Installing Devices
36