Table of Contents
Advertisement
Reset CLK-103 Clocks
The SuperClock-RF2 clocks can be reset from the Reset Device For New Input tab. Click the
corresponding reset button to restore the PLL registers to the default values (see the following
figure).
Power Tab
The SCUI can read the onboard INA226 power rail measurements for each of the power rails
listed in the following table. The measurements can be read once or scanned continuously.
UG1348 (v1.0) July 16, 2019
ZCU1285 Board User Guide
Figure 37: CLK-103 Last Set Tab
Figure 38: CLK-103 Reset Device For New Input Tab
Appendix E: System Controller
www.xilinx.com
Send Feedback
73
Advertisement
Table of Contents
