Xilinx ZCU1285 User Manual page 68

Restore CLK-101 Boot Frequency from EEPROM
The boot frequencies saved in EEPROM can be restored at any time using the Restore Device
Defaults tab. Click Restore Si570 User to restore the Si570 frequency stored in EEPROM, and
click Restore Si5368 User to restore the Si5368 frequency stored in EEPROM (see the following
figure).
View Last Set CLK-101 Frequencies
The last frequencies that were written to the CLK-101 Module can be viewed using the Last Set
tab. Click Read Si570 User Frequency to view the Si570 frequency and Last Set Si5368 User
Frequency to view the Si5368 frequency (see the following figure).
UG1348 (v1.0) July 16, 2019
ZCU1285 Board User Guide
Figure 30: CLK-101 Restore Device Defaults Tab
Figure 31: CLK-101 Last Set Tab
Appendix E: System Controller
www.xilinx.com
Send Feedback
68