Fmc Tab - Xilinx ZCU1285 User Manual

Note: The Button Functionality options apply to all buttons in the System Controller pane, not just the
Power tab. Be sure to switch back to Run Once when using other tabs in the SCUI.

FMC Tab

The ZCU1285 board provides two FPGA mezzanine card (FMC) ANSI/VITA 57.1 expansion
interfaces, JA3 and JA4 (callout 53 and 54,
table shows the FMC cards supported by the System Controller and the programmable clock
resources on each card.
Table 31: FMC Card Clock Sources
Xilinx FMC Card
XM101
XM104
XM105
XM107
Notes:
1. These FMC cards are not included in the ZCU1285 kit.
The FMC tab has options for viewing FMC card EEPROM data, changing the VADJ voltage for
each FMC interface, and programming clock sources (see the following figure).
UG1348 (v1.0) July 16, 2019
ZCU1285 Board User Guide
Figure 41: Read Power Rails Continuously
Figure 2: Board Component
Description
LVDS QSE card
Serial transceiver
connectivity card
Debug card
Loopback card
Figure 42: FMC Tab
Appendix E: System Controller
Locations). The following
Clock Source #1
Si570
Si570
Si570
Si570
Send Feedback
Clock Source #2
SI570
Si5368
N/A
N/A
www.xilinx.com
77