Xilinx ZCU1285 User Manual page 67

Save CLK-101 Boot Frequency to EEPROM
Default boot frequency settings can be stored in EEPROM, which are programmed into each
clock source at power-up. Enter the desired boot frequencies in the Set Boot Frequency tab and
press Enter to save the boot frequency to EEPROM (see the following figure). After the boot
frequencies are set, the Logging pane shows no errors and prints Finished.
UG1348 (v1.0) July 16, 2019
ZCU1285 Board User Guide
Figure 28: CLK-101 Set Si5368 Frequency
Figure 29: CLK-101 Set Boot Frequency Tab
Appendix E: System Controller
www.xilinx.com
Send Feedback
67