Input/Output And Expansion Ports; Power; Getting Started With The Flash Demonstration - Xilinx Virtex-6 FPGA ML605 Getting Started

Input/Output and Expansion Ports

•
•
•
•
•
•

Power

•
•

Getting Started with the Flash Demonstration

Before installing the software, you can run some of the demonstration designs that are pre-
installed on the BPI Flash, Platform Flash, and CompactFlash cards on the ML605
Evaluation Board. These demonstrations provide an overview of the board features. This
evaluation kit comes with a number of pre-installed demonstrations and examples, as well
as additional reference designs and application notes found on the Xilinx website. The
default demonstrations on the Platform Flash and CompactFlash exercise some of the
board features including verifying PCI Express connectivity and testing the UART,
Ethernet, DDR3, IIC, LEDs, and other commonly used embedded processing features.
Virtex-6 Getting Started Guide
UG533 (v1.4) November 15, 2010
16x2 LCD character display
DVI output
System Monitor
User pushbuttons (5), DIP switches (8), LEDs (13)
User GPIO with two SMA connectors
Two FMC expansion ports
♦
High Pin Count (HPC)
- Eight GTX transceivers
160 SelectIO™ interface signals
-
♦
Low Pin Count (LPC)
- One GTX transceiver
- 68 SelectIO interface signals
12V wall adapter or ATX
Voltage and current measurement capability of 12V, 2.5V, 1.5V, 1.2V, and 1.0V
supplies
www.xilinx.com
Getting Started with the Flash Demonstration
9