Superclock-Rf2 Module - Xilinx ZCU1285 User Manual

SuperClock-RF2 Module

The SuperClock-RF2 Module (callout 42,
clock module interface connector (J170) and provides a programmable, ultra low-noise and low-
jitter wideband RF clock source intended for use with the RFSoC RF data converters. It provides
three phase-aligned LVDS reference clocks, one single-ended LVCMOS reference clock, four
differential pair RF clocks for RF-ADCs, and four differential pair RF clocks for RF-DACs. The
SuperClock-RF2 module schematic, BOM, and Allegro board files are in the XTP document
package on the Zynq UltraScale+ RFSoC ZCU1285 Characterization Kit
SuperClock-RF2 Module block diagram is shown in the following figure.
SuperClock-RF2 Module Features
The following figure shows the SuperClock-RF2 Module. Each numbered feature referenced in
this figure is described in the following table and sections.
UG1348 (v1.0) July 16, 2019
ZCU1285 Board User Guide
Figure 2: Board Component
Figure 14: SuperClock-RF2 Module Block Diagram
Chapter 1: ZCU1285 Board Features and Operation
Locations) connects to the
website. The
Send Feedback
X22902-051519
www.xilinx.com
38