Mitsubishi Electric MELSEC iQ-R AnyWireASLINK User Manual page 74

(16) Once 'ProgramStart' (M1) turns on, the buffer memory address determined by adding 40 to 'ParamAdd_214' (U0\G11028) of the slave module (ID:
214H) with the address 20 is stored in 'SensingLevelArea_214' (D4000).
The sensing level of the slave module (address 20) is stored in 41st (Un\G12616) of 48 words of the parameter storage area
7 (Un\G12576 to Un\G12623). ( Page 109 Parameters)
3 PROGRAMMING
72
3.2 Communication Example When the Slave Module is Added or Deleted