Setting in the intelligent device station
Connect the engineering tool to the remote head module on the intelligent device station and set the parameters.
1.
Set the remote head module as follows.
[Project] [New]
2.
Set the items in "Network Required Setting" of "CPU Parameter" as follows.
[Navigation window] [Parameter] [RJ72GF15-T2] [CPU Parameter] [Network Required Setting]
3.
Set the RJ51AW12AL as follows.
[Navigation window] [Parameter] [Module Information] Right click [Add New Module]
4.
Click the [OK] button.
APPX
128
Appendix 5 When Connecting the Module to a Remote Head Module