Basic Setting; Bit Data Setting; Startup Operating Mode Setting - Mitsubishi Electric MELSEC iQ-R AnyWireASLINK User Manual

2.2

Basic Setting

Set the number of transmission points of the RJ51AW12AL and others.

Bit data setting

Set the number of bit data transmission points of AnyWireASLINK.
Item Description
Transmission points Set the number of bit data points.
setting The transmission cycle time is determined based on the specified
number of bit data points. ( Page 111 Transmission cycle time)

Startup operating mode setting

Set whether to read the parameters of slave modules at start-up of the RJ51AW12AL.
Item Description
Startup operating mode Set the operation mode at start-up.
setting
Setting range
• 0: 64 points (32 input points/32 output points)
• 1: 128 points (64 input points/64 output points)
• 2: 256 points (128 input points/128 output points)
• 3: 512 points (256 input points/256 output points)
• 10: 0 points (0 input points/0 output points)
(Default: 3: 512 points (256 input points/256 output points))
Setting range
• 0: Without slave information acquisition
• 1: Get slave Information acquisition
(Default: 0: Without slave information acquisition)
2 PARAMETER SETTINGS
2.2 Basic Setting
2
49