Mitsubishi Electric MELSEC iQ-R AnyWireASLINK User Manual page 111

■Parameters
Each slave module has the following types of parameters:
• Device parameter (19 types)
These parameters are unique to each slave module. The contents of the parameters vary depending on the types of slave
modules. For details, refer to the specifications of the slave module.
• AnyWireASLINK parameter (3 types)
These parameters are common to all the slave modules connected to AnyWireASLINK.
Name Read/write
Module ID Read
Status details Read
Sensing level Read
Corresponding buffer Detailed description
memory area
Un\G12288+n  30H
Indicates the slave module ID.
(n: 0 to 255) • 0000H to 00FEH: ID of a bit output slave module
1st of 48 words • 0200H to 02FEH: ID of a bit input slave module or bit I/O combined
slave module
• 0400H to 05FEH: ID of a word output slave module
• 0600H to 07FEH: ID of a word input slave module or word I/O
combined slave module
• 00FFH: Unset IDs of bit output slave modules and word output slave
modules
• 02FFH: Unset IDs of bit input slave modules and word input slave
modules
Un\G12327+n  30H
Indicates the status of the slave module.
(n: 0 to 255) The statuses of the slave modules can be checked with the on/off status
40th of 48 words of each bit.
■b0: Module power supply status
• On: Slave module voltage drop
• Off: No error
■b1: Sensing level status
• On: Sensing level drop
• Off: No error
■b2: I/O disconnection (ASLINKER)
• On: I/O disconnection
• Off: No error
■b3: I/O short-circuit (ASLINKER)
• On: I/O short-circuit
• Off: No error
■b4: Measurement alarm
• On: Alarm
• Off: No error
■b5: I/O power supply voltage drop (isolation slave module)
• On: I/O power supply voltage drop
• Off: No error
■b6: System area
■b7: Teaching setting error
• On: Teaching setting error
• Off: No error
■b8 to b13: Differs for each slave module
• On: Indicates different status depending on the slave module.
• Off: Indicates different status depending on the slave module.
■b14, b15: System area
Un\G12328+n  30H
Indicates the value of a connected sensor.
(n: 0 to 255) The value differs depending on the connected slave module.
41th of 48 words (Example: An analog value of 0 to 100% is indicated for an ON/OFF
sensor.)
APPX
Appendix 3 Buffer Memory
A
109