Mitsubishi Electric MELSEC iQ-R AnyWireASLINK User Manual page 72

(16) Once 'ProgramStart' (M1) turns on, the buffer memory address determined by adding 39 to 'ParamAdd_214' (U0\G11028) of the slave module (ID:
214H) with the address 20 is stored in 'StatusArea_214' (D3000).
(27) 'I/O disconnection detection flag' (M2) turns on when a disconnection of the slave module (ID: 214H) with the address 20 is detected.
(29) 'Status details error detection flag' (M3) turns on when an error of the slave module (ID: 214H) with the address 20 is detected.
The status details of the slave module (address 20) are stored in 40th (Un\G12567) of 48 words of the parameter storage area
6 (Un\G12528 to Un\G12575). ( Page 109 Parameters)
3 PROGRAMMING
70
3.2 Communication Example When the Slave Module is Added or Deleted