Mitsubishi Electric MELSEC iQ-R AnyWireASLINK User Manual page 49

■When the inspection is executed by the SET switch
SET switch
CPU module or power supply
AnyWireASLINK transmission
'AnyWireASLINK version compatibility
inspection executing flag' (XD)
'Parameter access completion flag' (X11)
LINK LED
ALM LED
Inputting/outputting word data or
bit data
'AnyWireASLINK version compatibility
inspection error' (X8)
(1) While holding down the SET switch, reset the CPU module or power off and on the system. (Hold down the SET switch for one second or longer.)
(2) When the AnyWireASLINK transmission starts, 'AnyWireASLINK version compatibility inspection executing flag' (XD) turns off and on, and 'Parameter
access completion flag' (X11) turns on and off.
(3) The AnyWireASLINK version compatibility inspection starts.
(4) During this period, the operation is not affected by the on/off status of the switch or the command.
(5) Parameter access is in progress.
(6) 'Parameter access completion flag' (X11) turns off and on upon completion of the parameter access.
(7) The AnyWireASLINK version compatibility inspection completes.
When 'AnyWireASLINK version compatibility inspection command' (YD) is turned off and on during
AnyWireASLINK version compatibility inspection, 'AnyWireASLINK version compatibility inspection executing
flag' (XD) does not turn on and off even if AnyWireASLINK version compatibility inspection is completed.
When 'AnyWireASLINK version compatibility inspection command' (YD) is turned on and off, 'AnyWireASLINK
version compatibility inspection executing flag' (XD) turns on and off.
(1)
(4)
ON
OFF
Stopping
the transmission
ON
(2)
OFF
ON
OFF OFF
Off
Off
Stopping
OFF
(3)
1.15 AnyWireASLINK Version Compatibility Inspection Function
Transmitting
ON
(5)
(6)
On Flashing
On (error completion only)
Inputting/outputting
ON (error completion only)
(7)
1
1 FUNCTIONS
47