Nokia 7302 Basics, Management And Oam Manual page 82

Monitor Commands
(2 of 2)
Sample output:
A:ALA-1>monitor>filter# mac 50 entry 10 interval 5 repeat 3 absolute
============================================================================
Monitor statistics for Mac filter 50 entry 10
============================================================================
At time t = 0 sec (Base Statistics)
----------------------------------------------------------------------------
Ing. Matches: 0
----------------------------------------------------------------------------
At time t = 5 sec (Mode: Absolute)
----------------------------------------------------------------------------
Ing. Matches: 0
----------------------------------------------------------------------------
At time t = 10 sec (Mode: Absolute)
----------------------------------------------------------------------------
Ing. Matches: 0
----------------------------------------------------------------------------
At time t = 15 sec (Mode: Absolute)
----------------------------------------------------------------------------
Ing. Matches: 0
============================================================================
A:ALA-1>monitor>filter# mac 50 entry 10 interval 5 repeat 3 rate
============================================================================
Monitor statistics for Mac filter 50 entry 10
============================================================================
At time t = 0 sec (Base Statistics)
----------------------------------------------------------------------------
Ing. Matches: 0
----------------------------------------------------------------------------
At time t = 5 sec (Mode: Rate)
----------------------------------------------------------------------------
Ing. Matches: 0
----------------------------------------------------------------------------
At time t = 10 sec (Mode: Rate)
82
Item Description
Parameters mac-filter-id — The MAC filter policy ID.
Values: 1 — 65535
entry entry-id — Displays information on the specified filter entry ID for the specified filter ID
only.
Values: 1 — 65535
interval seconds — Configures the interval for each display in seconds.
Default: 10 seconds
Values: 5 — 60
repeat repeat — Configures how many times the command is repeated.
Default: 10
Values: 1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
processing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
instead of the delta.
3HH-11982-AAAA-TQZZA
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Egr. Matches : 0
Egr. Matches : 0
Egr. Matches : 0
Egr. Matches : 0
Egr. Matches : 0
Egr. Matches : 0
Issue: 10