"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
9 Link Layer Discovery Protocol
9.1 Introduction
The IEEE 802.1ab Link Layer Discovery Protocol (LLDP) standard defines protocol
and management elements that are suitable for advertising information to stations
attached to the same IEEE 802 LAN (emulation) for the purpose of populating
physical or logical topology and device discovery management information
databases.
For more information on LLDP, please refer to the FD 100/ 320 Gbps NT and FX NT
IHub Interface Guide.
9.2 LLDP CLI Command Reference
9.2.1
configure
— system
9.2.2
show
— system
Issue: 10
9.1 Introduction
9.2 LLDP CLI Command Reference
9.3 LLDP CLI Commands
LLDP Commands
—
lldp
—
message-fast-tx
— no
message-fast-tx
—
message- fast-tx-init
—
no
message- fast-tx-init
—
reinit-delay
time
—
no
reinit-delay
—
shutdown
— no
shutdown
—
tx-credit-max
count
—
no
tx-credit-max
—
tx-hold-multiplier
— no
tx-hold-multiplier
—
tx-interval
interval
— no
tx-interval
Show Commands
—
lldp
3HH-11982-AAAA-TQZZA
time
count
multiplier
Link Layer Discovery Protocol
213