Security
(2 of 2)
4.4.2.30
Table 66
4.4.2.31
Table 67
66
Item
Description
Default
None
Parameters
router-name — Base
service
service command
Item
Description
Syntax
[no] service service-id
Context
configure>system>security>cpu-filter>ipv6-filter>entry>match
Description
This command specifies a service-id to be used in the match criteria.
Parameters
service-id — Specifies an existing service ID to be used in the match criteria. Only services of
type IES, VPRN and v-VPLS are allowed.
Values: 1 — 2147483647
src-ip
src-ip command
Item
Description
Syntax
[no] src-ip {ipv6-address/prefix-length]
Context
configure>system>security>cpu-filter>ipv6-filter>entry>match
Description
This command configures a source IPv6 address range to be used as an IP filter match
criterion.
The no form of the command removes the source IP address match criterion.
Parameters
ipv6-address — The IPv6 address for the IP match criterion in dotted decimal notation.
Values: : ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces) x:x:x:x:x:x::d.d.d.d where:
•
x = [0..FFFF]H
•
d = [0..255]D
prefix-length — The IPv6 prefix length for the ipv6-address expressed as a decimal integer.
Values: (1..28)
3HH-11982-AAAA-TQZZA
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10