3.5 System Management Cli Commands; System Information Commands; Lacp-Priority; Time - Nokia 7302 Basics, Management And Oam Manual

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"

3.5 System Management CLI Commands

The following commands are described below:
•
•
•
•
3.5.1
3.5.1.1
Table 5
3.5.1.2
Table 6
Issue: 10

System Information Commands

System Administration Commands
Show Commands
Clear Commands
System Information Commands

lacp-priority

lacp-priority command
Item Description
Syntax lacp-priority lacp-priority
no lacp-priority
Context configure>system
Description This command configures the Link Aggregation Control Protocol (LACP) system priority on
aggregated Ethernet interfaces. LACP allows the operator to aggregate multiple physical
interfaces to form one logical interface
Default 32768
Parameters lacp-priority — Specifies the LACP system priority.
Values: 1 — 65535

time

time command
Item Description
Syntax time
Context configure>system
Description This command enables the context to configure time parameters.
3HH-11982-AAAA-TQZZA
System Management
29