"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
7.2.3.22
Table 203
Issue: 10
force-switchover
force-switchover command
Item
Description
Syntax
force-switchover sdp-id:vc-id
no force-switchover
Context
tools>perform>service>id>endpoint
Description
This command forces a switch of the active spoke SDP for the specified service.
Parameters
sdp-id:vc-id — Specify an existing spoke SDP for the service.
3HH-11982-AAAA-TQZZA
Tools
165