Association; Bridge-Identifier; Table 207 Association Command; Table 208 Bridge-Identifier Command - Nokia 7302 Basics, Management And Oam Manual

Ethernet Connection Fault Management
8.12.1.2
Table 207
8.12.1.3
Table 208
184

association

association command

Item

Description

Syntax

association ma-index [format {icc-based | integer | string | vid | vpn-id}] name ma-name
association ma-index
no association ma-index

Context

configure>eth-cfm>domain
Description This command creates an association for an ETH CFM domain.
The no form of the command deletes the association.
Parameters ma-index — The MA index.
Values: 1..4294967295]
icc-based | integer | string | vid | vpn-id — Keywords. They define the format of the MA
name.
Values:
•
icc-based — Raw ASCII, exactly 13 characters
•
integer — Values: 0..65535]
•
string — Raw ASCII
•
vid — Values: 0..4094
•
vpn-id — RFC-2685 VPN ID. Format: xxx:xxxx, where x is a value between 00 and FF (for
example, 00164D:AABBCCDD
Default: integer
ma-name — The MA name (1..45 characters

bridge-identifier

bridge-identifier command
Item Description
Syntax bridge-identifier bridge-id
no bridge-identifier bridge-id
Context configure>eth-cfm>domain>association
Description The identification of the service in which the MA is deployed. This is the service ID that was
created in the v-VPLS/VPLS service.
The no form of the command removes the identification.
Parameters bridge-id — The service ID.
Values: 1..2147483647
3HH-11982-AAAA-TQZZA
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10