Send; Entry; Table 78 Send Command; Table 79 Entry Command - Nokia 7302 Basics, Management And Oam Manual

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
4.4.3.6
Table 78
4.4.3.7
Table 79
(1 of 2)
Issue: 10

send

send command
Item Description
Syntax send
Context configure>system>security>keychain>direction>uni
Description This command specifies the send nodal context to sign TCP segments that are being sent by
the router to another device.
Default None

entry

entry command
Item Description
Syntax entry entry-id key [authentication-key | hash2-key] [hash2] algorithm algorithm
no entry entry-id
Context configure>system>security>keychain>direction>bi
configure>system>security>keychain>direction>uni>receive
configure>system>security>keychain>direction>uni>send
Description This command defines a particular key in the keychain. Entries are defined by an entry ID. A
keychain must have valid entries for the TCP Enhanced Authentication mechanism to work.
The no form of the command removes the entry from the keychain. If the entry is the active
entry for sending, then this will cause a new active key to be selected (if one is available using
the youngest key rule). If it is the ONLY possible send key, then the system will reject the
command with an error indicating the configured key is the only available send key.
If the key is one of the eligible keys for receiving, it will be removed. If the key is the ONLY
possible eligible key, then the command will not be accepted, and an error indicating that this
is the only eligible key will be output.
The no form of the command deletes the entry.
Default There are no default entries.
3HH-11982-AAAA-TQZZA
Security
71