Icmp-Code; Icmp-Type; Router; Table 63 Icmp-Code Command - Nokia 7302 Basics, Management And Oam Manual

"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
4.4.2.27
Table 63
4.4.2.28
Table 64
4.4.2.29
Table 65
(1 of 2)
Issue: 10

icmp-code

icmp-code command
Item Description
Syntax [no] icmp-code icmp-code
Context configure>system>security>cpu-filter>ipv6-filter>entry>match
Description Configures matching on ICMP code field in the ICMP header of an IPv6 packet as a filter match
criterion.
This option is only meaningful if the protocol match criteria specifies ICMP (1).
The no form of the command removes the criterion from the match entry.
Default no icmp-code
Parameters icmp-code — The ICMP code values that must be present to match.

icmp-type

icmp-type command
Item Description
Syntax [no] icmp-type icmp-type
Context configure>system>security>cpu-filter>ipv6-filter>entry>match
Description This command configures matching on the ICMP type field in the ICMP header of an IPv6
packet as a filter match criterion.
This option is only meaningful if the protocol match criteria specifies ICMP (1).
The no form of the command removes the criterion from the match entry.
Default no icmp-type
Parameters icmp-type — The ICMP type values that must be present to match.

router

router command
Item Description
Syntax [no] router router-name
Context configure>system>security>cpu-filter>ipv6-filter>entry>match
Description This command specifies a base router to be used in the match criteria.
3HH-11982-AAAA-TQZZA
Security
65