Nokia 7302 Basics, Management And Oam Manual page 104

Intelligent services access manager/fttn/fx, fd 100/320gbps nt and fx nt ihub system
Hide thumbs Also See for 7302:
Table of Contents

Advertisement

Monitor Commands
(2 of 2)
Sample output:
A:ALA-12# monitor service id 100 sdp 10 repeat 3
============================================================================
Monitor statistics for Service 100 SDP binding 10
============================================================================
At time t = 0 sec (Base Statistics)
----------------------------------------------------------------------------
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
----------------------------------------------------------------------------
At time t = 11 sec (Mode: Delta)
----------------------------------------------------------------------------
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
----------------------------------------------------------------------------
At time t = 22 sec (Mode: Delta)
----------------------------------------------------------------------------
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
----------------------------------------------------------------------------
At time t = 33 sec (Mode: Delta)
----------------------------------------------------------------------------
I. Fwd. Pkts. : 0 I. Dro. Pkts. : 0
E. Fwd. Pkts. : 0 E. Fwd. Octets : 0
============================================================================
A:ALA-12#
104
Item
Description
Parameters
sdp-id[:vc-id] — Specify the SDP identifier.
sdp-id: 1 — 17407
vc-id: 1 — 4294967295
far-end ip-address — The system address of the far-end ISAM for the SDP in dotted decimal
notation.
interval seconds — Configures the interval for each display in seconds.
Default: 11 seconds
Values: 11 — 60
repeat repeat — Configures how many times the command is repeated.
Default: 10
Values: 1 — 999
absolute — When the absolute keyword is specified, absolute rate-per-second value for each
statistic is displayed
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
instead of the delta.
3HH-11982-AAAA-TQZZA
"FD 100/320Gbps NT and FX NT IHub System
Basics, Management and OAM Guide"
Issue: 10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

73307360

Table of Contents