Nokia 7302 Basics, Management And Oam Manual page 202

Ethernet Connection Fault Management
Accumulated Frames
Total Tx
Total Rx
Total Loss
Loss Ratio(%)
==================================================================
Table
Table 236
Output example:
show eth-cfm mep 100 domain 3 association 1 two-way-slm-test
==================================================================
Eth CFM Two-way SLM Test Result Table (Test-id: 588)
==================================================================
Peer Mac Addr
------------------------------------------------------------------
d0:0d:1e:00:01:01
==================================================================
202
:
:
:
:
236 shows the synthetic loss measurement test output fields.
ETH-CFM MEP Synthetic Loss Measurement Test Field Descrip-
tions
Label Description
Peer Mac Addr Displays the MAC address of the far-end (remote) node.
Remote MEP Remote MEP id.
Count The number of probes that are sent when the last frame is not lost. When the last
frame(s) is/are lost, the count + unacknowledged equals the number of probes sent.
In loss Packet loss on the way back from the remote node to the test initiator.
Out loss Packets lost on the way to the remote node, from test initiator to test destination.
Unack Number of packets at the end of the test that were not responded to.
3HH-11982-AAAA-TQZZA
"FD 100/320Gbps NT and FX NT IHub System
Near-End Far-End
30 36
35 30
1 0
2.78 0.00
Remote MEP Count
101 20
Basics, Management and OAM Guide"
In Loss Out Loss
0 0
Unack
0
Issue: 10