Removing The Static Eliminator (Upper/Lower Escape Delivery Unit); Removing The Stapler Unit - Canon Staple Finisher-AA1 Service Manual

1x
[1]
Removing the Static
Eliminator (Upper/Lower Escape
Delivery Unit)
■ Preparation
1. Remove the front cover.
" Removing the Front Cover" on page 94
2. Remove the front inner cover.
" Removing the Front Inner Cover" on page 95
3. Remove the rear cover.
" Removing the Rear Cover" on page 94
4. Remove the escape tray
"Removing the Escape Tray" on page 96
■ Procedure
1. Remove the static eliminator [1].
• 1 screw [2]
1x
[2]
[3] [2]
[1]
4. Parts Replacement and Cleaning
■ Handling after parts replacement
1. Clear the parts counter.
(LV1) COPIER > COUNTER > DRBL-2 > TRY-STC1

Removing the Stapler Unit

■ Preparation
1. Remove the front cover.
" Removing the Front Cover" on page 94
2. Remove the front inner cover.
" Removing the Front Inner Cover" on page 95
■ Procedure
1. Remove the lower cover [1].
• 1 claw [2]
1x
[2]
2. Remove the flexible cover [1].
• 2 connectors [2]
• 1 screw [3]
2x
1x
3. Remove the stapler unit [1].
• 1 screw [2]
108
[2]
[1]
[3]
[1]