Removing The Front Inner Cover - Canon Staple Finisher-AA1 Service Manual

Removing the Front Inner
Cover
■ Preparation
1. Remove the front cover.
" Removing the Front Cover" on page 94
■ Procedure
1. Remove the face cover [1].
• 1 screw [2]
NOTE:
The face cover [1] is connected only to the staple finisher.
1x
2. The face cover [1] is connected only to the staple
finisher.
• 1 claw [2]
• 1 connector [3]
[1]
[2]
4. Parts Replacement and Cleaning
[1]
3. Avoid the guide, and remove the front inner cover
[1].
• 4 screws [2]
NOTE:
Escape the punch unit when it is installed.
4x
[2]
[1]
[2]
95
[3]
[2]
[2]