Canon Staple Finisher-AA1 Service Manual page 71

3. The saddle alignment motor (M203) drives to operate the saddle alignment plate. The saddles is processed, and the paper
stacked in the tray is aligned in the cross feed direction.
4. Operations described in steps (2) to (3) are repeated for each sheet.
< Related service mode >
• (Lv.1) SORTER > ADJUST > SDL-ALG: Adjusting the alignment width of the saddle stitcher
• (Lv.1) SORTER > OPTION > SDL-ALG: Setting the paddle operation when stacking the paper in the saddle stitcher unit
< Related error code >
• E5F0-8001: Saddle Paper End Stopper Motor error
• E5F0-8002: Saddle Paper End Stopper Motor error
• E5F3-8001: Saddle Alignment Motor error
• E5F3-8002: Saddle Alignment Motor error
• E5F8-8001: Saddle Switching Lever Motor error
• E5F8-8002: Saddle Switching Lever Motor error
• E577-8001: Saddle Feed/Paddle Motor error
• E577-8002: Saddle Feed/Paddle Motor error
Rear Saddle
Alignment Plate
63
2. Technical Explanation
M203
Front Saddle
Alignment Plate
Paper