Removing The Paddle Unit - Canon Staple Finisher-AA1 Service Manual

2x
[2]
■ Handling after parts replacement
1. Clear the parts counter.
(LV1) COPIER > COUNTER > DRBL-2 > SDL-STC

Removing the Paddle Unit

■ Procedure
1. Lower the stack tray.
2. Lower the swing unit [1].
[1]
[1]
4. Parts Replacement and Cleaning
3. Turn the paddle axis until the paddle[2] reaches to
the guide[3].
[2]
NOTE:
Turn the paddle axis by 180 degree furthermore when the
claw[2] is still behind the paddle shaft.
[2]
4. Remove the paddle [1].
• 1 claw [2] each
CAUTION:
When displacing the shaft support[3], the phase of the
paddle probably does not fit. When installing the
paddle, be sure to check the phase of the paddle.
[3]
113
[1]
[3] [3]
[2]
[3]
[2]