Canon Staple Finisher-AA1 Service Manual page 173

2. Adjust the folding position by the following service mode.
• SORTER > ADJUST > SDL-FLD
NOTE:
Folding position adjustment of thin paper
In the case using thin paper, adjusting value is total amount values of SDL-FLD and SDL-FLD2. Adjsut SDL-FLD first, and adjust
the staple position of thin paper by the following service mode.
• SORTER > ADJUST > SDL-FLD2
Adjustment range: -20 to 20 (Unit: 0.1mm)
As the value is incremented by 1, the fold position moves by 0.1 mm.
+ : The fold position moves toward the left at open page of the book
- : The fold position moves toward the right at open page of the book
■ Adjusting the Saddle Alignment Plate Position
<Use case>
• When misalignment occurs in front/rear direction.
B
Feed Direction
Feed Direction
Feed Direction
-
+
B B
B B
165
Folding Position
B
5. Adjustment