Alignment/Shifting Operation - Canon Staple Finisher-AA1 Service Manual

<Related service mode>
• SORTER > ADJUST > RBLT-PRS: Adjusting the height of the return belt 1
• SORTER > ADJUST > RBLT-PS2: Adjusting the height of the return belt 2
• SORTER > ADJUST > RBLT-PS3: Adjusting the height of the return belt 3
<Related error code>
• E578-8001: Return Roller Lift Motor error
• E578-8002: Return Roller Lift Motor error
• E57B-8001: Paper End Pushing Guide Motor error
• E57B-8002: Paper End Pushing Guide Motor error
• E553-80F1: Stack Delivery/Paddle Motor error
• E553-80F2: Stack Delivery/Paddle Motor error
• E583-8001: Tray Auxiliary Guide Motor error
• E583-8002: Tray Auxiliary Guide Motor error

Alignment/Shifting Operation

The paper stacked on the processing tray is aligned in the width direction by the front and rear alignment plates.
When shift sort is specified, the paper stacked on the processing tray is shifted to the front or rear side. The front alignment plate
is driven by the front alignment motor (M107) and the rear alignment plate by the rear alignment motor (M108). The home positions
of the alignment plates are detected by the front alignment HP sensor (PS115) and rear alignment HP sensor (PS116).
Front Alignment Plate
Front Alignment HP Sensor (PS115)
Front Alignment Motor (M107)
Rear Alignment Motor (M108)
50
2. Technical Explanation
Rear Alignment Plate
Rear Alignment HP Sensor
(PS116)