Program Example - Mitsubishi Electric Melsec Q Series User Manual

7
PROGRAMMING

7.6.4 Program example

(1) Settings
(2) Assignment of devices in program example
Device
X19 Time control start response signal
Device
X27 Time control execution command
Table7.55 List of Devices Used as Automatic Refresh or Buffer Memory Read Target
Device
D5000 Time data write request response area
The example program in this section uses the following example requests.
Item
Service name
The program example in this section uses the following device assignments.
(a) Devices used by the QJ71PB92V
Table7.53 List of Devices for the QJ71PB92V
Description
(b) Devices used by the user
Table7.54 List of Devices for the User
Description
(c) Devices used as automatic refresh or buffer memory read target
Description
7.6 Program Example for Time Control over DP-Slaves
7.6.4 Program example
Table7.52 Details of Program Example
Time data write request
Device
Y19 Time control start request signal
Device
M0
Refresh start request (
Device
Description
Description
Description
Section 7.1.1)
Description
7
- 56
1
2
3
4
5
6
7
8