Mitsubishi Electric Melsec Q Series User Manual page 250

7
PROGRAMMING
(2) MELSECNET/H (remote I/O network) settings
(3) PROFIBUS-DP settings
7
- 61 7.8 Program Example When Mounting the QJ71PB92V on a MELSECNET/H Remote I/O Network
7.8.1 Program example for the I/O data exchange function (When mounted on a remote I/O station)
(a) Remote master station (QJ71LP21-25) settings
Station No.
Transmission speed
Operation mode
(b) Remote I/O station (QJ72LP25-25) settings
Station No.
Transmission speed
Operation mode
(c) Parameter settings on GX Works2 (remote master station)
Figure 7.23 Network Parameter Setting
The parameter settings on QJ71PB92V, DP-Slaves and GX Configurator-DP are the
same as those explained in Section 7.1.
Table7.58 Remote Master Station Settings
Item
Table7.59 Remote I/O Station Settings
Item
Description
Station No. : 0
25 Mbps (MODE 4)
Online
Description
Station No. 1
25 Mbps (MODE 4)
Online