Mitsubishi Electric Melsec Q Series User Manual page 254

7
PROGRAMMING
Figure 7.25 Program Example for the I/O Data Exchange Function (When Mounted on a Remote I/O Station) (Continued)
7
- 65 7.8 Program Example When Mounting the QJ71PB92V on a MELSECNET/H Remote I/O Network
7.8.1 Program example for the I/O data exchange function (When mounted on a remote I/O station)
Program for control of DP-Slaves (
Processing for failure of
input data reading
Processing for failure of
Slave status area reading
Section 7.1.1 (2)(a)
)
Processing for failure of
output data writing
Not required when initial settings are not changed
Reading input data
Reading Slave status
area
Writing output data