Mitsubishi Electric Melsec Q Series User Manual page 262

7
PROGRAMMING
Set the transmission speed.
Set the control master FDL address.
Set the I/O No. of the QJ71PB92V.
(In 3 digits)
Set a Slave Watchdog timer value that
meets the calculation formula shown in
Section 4.8 (5).
Set the FDL address of the DP-Slave.
Set it as a Normal DP-Slave.
7
- 73 7.9 Program Examples for Use in the Redundant System
7.9.1 I/O Data Exchange Program Examples
(c) Parameter settings in GX Configurator-DP
<Master parameters>
<Slave parameters>
Figure 7.33 I/O Data Exchange Parameter Setting Example (GX Configurator-DP)
Set the I/O data size.