Mitsubishi Electric Melsec Q Series User Manual page 183

6
PARAMETER SETTING
(2) Slave Specific Buffer Devices window
Item
Slave name
I/O Word Size
Input Device
Output Device
Set the devices used for the communication in units of DP-Slaves.
(a) Operation procedure
Click the
Edit Devices
(b) Setting items
Figure 6.10 Slave Specific Buffer Devices window
Table6.9 Automatic refresh setting items for each DP-Slave
Displays the DP-Slave name specified in the "Name" field of the "Slave Settings" window.
Displays the I/O data size of the DP-Slave (unit: word).
The display format is: Number of words of input data/number of words of output data.
Set the start device used for input data communications.
Set a value in unit of 16 points for a bit device.
After the start device is entered, the device range is displayed with the start and end
addresses.
Set the start device used for output data communications.
Set a value in unit of 16 points for a bit device.
After the start device is entered, the device range is displayed with the start and end
addresses.
6.6 Automatic Refresh Parameters
6.6.2 Automatic Refresh Settings
button in the "CPU Device Access" window.
Description
1
2
3
4
5
6
7
8
6
- 18