Slave Parameters - Mitsubishi Electric Melsec Q Series User Manual

6
PARAMETER SETTING

6.5 Slave Parameters

Set parameters for each DP-Slave.
(1) Start procedure
Right-click the DP-Slave icon in the "PROFIBUS Network" window
Settings].
(2) Setting items
(a) Slave Settings window
Item
Model
Vendor
Revision
Name
FDL Address
Right-click the DP-Slave.
Figure 6.5 Slave Settings window start procedure
Figure 6.6 Slave Settings window
Table6.6 Slave Parameter Setting Items
Displays the model name of the DP-Slave.
Displays the vendor of the DP-Slave.
Displays the versions of the GSD(DDB) file and the device.
Set the name of the DP-Slave.
Setting range: up to 16 alphanumeric characters
Set the FDL address (station number).
Setting range: 0 to 125
6.5 Slave Parameters
Description
1
2
[Slave
3
4
5
6
7
8
(To the next page)
6
- 10