Redundant System Configuration (Redundant Cpus Only); Profibus-Dp Network Configuration - Mitsubishi Electric Melsec Q Series User Manual

2
SYSTEM CONFIGURATION

2.3 Redundant System Configuration (Redundant CPUs Only)

2.3.1 PROFIBUS-DP network configuration

This section explains configuration of a redundant PROFIBUS-DP system in which the
QJ71PB92Vs are mounted.
For the redundant system using the QJ71PB92V, refer to Section 4.8.
(1) System equipment
2
- 8 2.3 Redundant System Configuration (Redundant CPUs Only)
2.3.1 PROFIBUS-DP network configuration
The following table shows the equipment required for the redundant PROFIBUS-DP
system.
System Equipment
DP-Master (Class 1)
Configuration tool
DP-Slave
Repeater
PROFIBUS cable
Bus terminator
Table2.4 System Equipment
QJ71PB92V, function version D or later (
GX Configurator-DP Version 7.00A or later
(To mount the QJ71PB92V on an extension base unit, use GX
Configurator-DP Version 7.03D or later.)
Redundant or non-redundant DP-Slave (such as the QJ71PB93D)
Required when 32 or more DP-Slaves are connected
Section 5.5.1
Description
Section 2.4)