4
FUNCTIONS
(c) When no matching module is identified in GX Configurator-DP
(d) After operation with the QJ71PB92D-compatible function enabled
The following dialog box is displayed in GX Configurator-DP.
Figure 4.38 When No Matching Module is Identified in GX Configurator-DP
If the above dialog box appears, check if:
• The module selected in the GX Configurator-DP project is QJ71PB92D.
• The version of the GX Configurator-DP is any other than Version 7.00A.
• The "Starting I/O number" setting in the "Master Settings" window of GX
Configurator-DP is correct.
For details after the operation, refer to the following manual.
PROFIBUS-DP Interface Module User's Manual
4.9 QJ71PB92D-Compatible Function
1
2
3
4
5
6
7
8
4
- 44