Mitsubishi Electric Melsec Q Series User Manual page 263

7
PROGRAMMING
(d) Parameter settings in GX Works2
Set a standby master FDL
address.
Select "Device detail settings".
Set tracking devices.
Remark
<Intelligent function module switch setting>
<Tracking settings>
*1
Figure 7.34 I/O Data Exchange Parameter Setting Example (GX Works2)
* 1 For tracking devices used for continuing respective functions of the QJ71PB92V, refer to (4) in this
section and sections 7.9.2 to 7.9.7.
For details on tracking setting, refer to the user's manual for the redundant system
for the CPU module used.
7.9 Program Examples for Use in the Redundant System
7.9.1 I/O Data Exchange Program Examples
1
2
3
4
5
6
7
8
7
- 74