Huawei LampSite Installation Manual page 66

LampSite
Installation Guide
Context
If the pRRU is installed on the ceiling, the temperature of the ceiling may increase by a maximum
of 30 degrees. Therefore, whether a pRRU can be installed on a ceiling depends on the ceiling
material.
Procedure
Step 1 Determine the position for installing the pRRU based on the construction blueprint and the space
requirements.
Step 2 Place the plate in the installation position against the ceiling. Then, level the plate and mark the
two anchor points using a marker, as shown in
Figure 5-12 Anchor points of the pRRU installation kits (unit: mm)
(1) Ceiling
To prevent inhalation or eye contact with dust, take adequate preventive measures when drilling
holes.
Issue 02 (2014-05-27)
NOTICE
NOTE
For pRRU installation space requirements, see
(2) Plate
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5.1.3 Space Requirements.
Figure 5-12.
(3) Anchor point of the bolt
5 Installing a pRRU
61