Obtaining The Mac Address (Optional); Installation Process - Huawei LampSite Installation Manual

LampSite
Installation Guide

5.2 Obtaining the MAC Address (Optional)

Before installing a pRRU, record the media access control (MAC) address, which will be used
during pRRU commissioning. This section applies only when a pRRU with three transmission
ports is configured with a Wi-Fi daughter board.
Context
The MAC address indicates the IP address through which a device can be reached.
Procedure
Step 1 Remove the backup WIFI MAC label from the front housing of the pRRU and keep them secure,
as shown in
Figure 5-4 Removing backup WIFI MAC label
Step 2 Save the MAC according to
commissioning personnel.
----End

5.3 Installation Process

This section describes the pRRU installation process, which involves installing a pRRU, the AC/
DC power adapter, and cables, checking the pRRU hardware installation, and powering on the
pRRU.
Figure 5-5
Issue 02 (2014-05-27)
Figure 5-4.
NOTE
l Do not remove the WIFI MAC label on the side of the pRRU housing.
l Before removing the backup WIFI MAC label, photograph it.
shows the pRRU installation process.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6.1 MAC Collection Template, and report it to the pRRU
5 Installing a pRRU
54